New 2009 colors! Wicked (metalic red) and Deep (slightly lighter blue)! Powder-Coat Color Options  We mix these power-coat colors as close as we can to match the exterior car colors.  Almost chrome is very close to matching chrome plating or polished aluminum.

Call 937-561-8661 for Sales and Service

2.5"  Replacement Right Side Intercooler Pipe

RIP-SSC above stock parts Installed Trim Stock Air-box for RIP-SS Greddy RS on RIP

GM's stock pipe flattens out at the air box reducing air flow about 40%.  Ours is mandrel bent from 2.5" outside diameter tubing WITHOUT FLAT SPOTS.   Pipes are without mounting brackets unless selected as an option. Choose from either 18ga aluminized steel for low cost or 16ga aluminum for light weight.    New black (unless you choose red or blue) silicone coupler is included for the right side to turbo connection, re-use your factory clamps.   We powder-coat for finish durability.  Choose from factory exterior colors or almost chrome.  All items are Made in the U.S.A.  The Intercooler end is necked down to 2 3/8" to properly fit the factory couplers.    Note: when using the factory air-box, its right mounting tab will have to be trimmed as shown in the picture on left. Color Mysterious (Black)Envious (Green)Deep 07-08 (Blue)Deep 09 (Blue)Wicked (Met Red) Sly (Dk Silver)Cool (Lt Silver)Agressive (Red)Brazen(Orange)Mean (Yellow)Pure (White) Almost ChromeUncoated 16ga aluminum Right Side Intercooler Pipe (factory replacement) RIP-SSC2 - $129 Options Top mounting  Bracket Welded to Pipe - $12 Bottom mounting  Bracket Welded to Pipe - $12 BOV Flange TiAlHKSSynapseGreddy RSBlitzTurbo XS Weld Blow-Off-Valve Flange on Right Side Pipe $49 Color Red BlueBlack Silicone Coupler Optional Color - $.01

2.5"  Replacement Left Side Intercooler Pipe

LIP-SSA below factory pipe  Greddy RS on LIP Blitz / Turbo XS HKS(old style) / TiAl

GM's stock pipe flattens out at the air box reducing air flow about 35%.  Ours is mandrel bent from 2.5" outside diameter tubing WITHOUT FLAT SPOTS.   Pipes are without mounting brackets unless selected as an option. Choose from either 18ga aluminized steel for low cost or 16ga aluminum for light weight.    Fits stock IC couplers.   We powder-coat for finish durability.  Choose from factory exterior colors or almost chrome.  We can also weld a flange for an aftermarket Blow-Off-Valve to our Left Side pipes. Get that great sound as you vent to atmosphere.  If you have a BOV that we don't list, please call.  All items are Made in the U.S.A. The Intercooler end is necked down to 2 3/8" to properly fit the factory couplers. Color Mysterious (Black)Envious (Green)Deep 07-08 (Blue)Deep 09 (Blue)Wicked (Met Red) Sly (Dk Silver)Cool (Lt Silver)Agressive (Red)Brazen(Orange)Mean (Yellow)Pure (White) Almost ChromeUncoated 16ga aluminum Left Side Intercooler Pipe (factory replacement) LIP-SSA2 - $149 Options Top mounting  Bracket Welded to Pipe - $12 Bottom mounting  Bracket Welded to Pipe - $12 We can also weld flanges for aftermarket Blow-Off-Valves to our Left Side pipes. Get that great sound as you vent to atmosphere. BOV Flange TiAlHKSSynapseGreddy RSBlitzTurbo XS Weld Blow-Off-Valve Flange on Left Side Pipe $49

2.5"  Replacement Throttle Body Elbow

LIP-SSB & Factory TB elbow above

Replace the factory rubber TB elbow with this elbow made from 2 3/4" mandrel bent aluminized steel tubing.  Its bent on a 2 3/4" centerline radius for better air flow.  It fits our LIP-SSA very well.  It will fit the stock aluminum pipe but pushes the mounting brackets off a little.   Works great for mounting water or alcohol injection nozzles.  All items are Made in the U.S.A. Color Mysterious (Black)Envious (Green)Deep 07-08 (Blue)Deep 09 (Blue)Wicked (Met Red) Sly (Dk Silver)Cool (Lt Silver)Agressive (Red)Brazen(Orange)Mean (Yellow)Pure (White) Almost ChromeUncoated 2 3/4" steel Throttle Body Elbow  LIP-SSB - $109 Color Red BlueBlack Optional Silicone Couplers and T-Bolt Clamps (instead of standard) - $39