Solstice-Sky Intake Pipes

New 2009 colors! Wicked (metallic red) and Deep (slightly lighter blue)! Powder-Coat Color Options   We mix these power-coat colors as close as we can to match the exterior car colors.  Almost chrome is very close to matching chrome plating, but more prone to marring and scratching and must be treated carefully to last.

Call 937-561-8661 for Sales and Service .  Installation is available for many items, call for a quote!

Our 3" intake pipe for your Solstice-Sky-Opel  flows 42% more air than stock and replaces the air-box and filter.  The filter end is expanded to form a velocity stack for maximum airflow.  You'll hear the air inrush and your turbo's blow-off valve.  The aluminum intake and filter reduce the intake weight from 8 to 2 pounds . Made from mandrel bent 16ga steel or aluminum tubing.   Choose from factory exterior colors or Polished.  Comes with mounting bracket. Just remove your factory Mass Air Sensor from the plastic air-box and install at the flange provided on this intake.  Installation Instructions

Westers Garage tested our Intake Pipe and reports
"
Factory OEM airbox for 2007 flows 538.1 CFM
The airbox less the filter - 656.9 CFM
Airbox Lid only 702 CFM

Dejon Pipe with MAF restriction design and paper AEM
772.8 CFM (Outflows straight pipe with filter)
Bare pipe--no filter--840.0 CFM
Dejon straight pipe with paper filter 766.0 CFM
Same pipe with no paper filter 839.2 CFM

These were corrected to 25.0" but flowed at 7.00" of test pressure. Flowed LESS with the paper
filter removed.
This is a common problem--as high air velocities distort incoming air as the
pipe edge begins to form a wall. When we flowed at 16.0", the straight pipe
flowed 757.8 WITH the filter. Without the filter, flow dropped to 622.7 CFM.
This is important to note at higher flow rates, although this engine will
never see these numbers.
Lyndon
WESTERS GARAGE"

3"  Upper Pipe (replaces air box) WITH AEM dry filter


 Installed 


 Polished Shown with Air Filter

Intake
Color
Finish
Year of car
Engine

New! Replacement Lower Intake Pipe for stock turbo 2.0 Cars


CIP-SSG

Replace your factory rubber intake pipe with this 18ga steel one.  It fits from the turbo to the factory air box or any of our intakes above.  The valve cover breather tube is welded on...forever.

Color
Lower intake pipe  CIP-SSG - $139

    

 

Air Filters



stock replacement K&N filter

    K&N Stock Air-Box replacement Air Filter GXP & Redline-$49.95

    AEM  dry (no oil) 3.25" outlet 5"lg Cone Air Filter for Intake Pipes - $49.95